Exam4Free 300-510 Dumps Real Exam Questions Test Engine Dumps Training
Cisco 300-510 exam dumps and online Test Engine
The Cisco 300-510 exam is an excellent way to demonstrate your knowledge and expertise in advanced routing solutions for service provider networks. By passing this exam and earning your certification, you can take your career to the next level and open up many exciting opportunities in the field of service provider networking.
The Cisco 300-510 certification exam consists of 60-70 multiple-choice and simulation questions that must be completed within 90 minutes. To pass the exam, candidates must achieve a minimum score of 750 out of 1000 points. The exam can be taken at any Pearson VUE testing center globally or online through the Pearson VUE online proctored exam platform.
NEW QUESTION # 90
Refer to the exhibit.
Refer to the exhibit. CE1 and CE2 use connectivity over the service provider cloud to reach CE3 In the event of a link failure in the service provider cloud which BGP feature relies on IGP convergence to quickly assist in the installation of a backup path?
- A. BGP graceful restart
- B. BGP confederations
- C. BGP route dampening
- D. BOP PIC core
Answer: D
NEW QUESTION # 91
Refer to the exhibit.
Refer to the exhibit. Customers A and C are experiencing packet drops when connecting to the application server While troubleshooting the problem the network engineer confirms that the IS-lS Level- 1/2 adjacency is up between routers A B C. and D and both customers can communicate with the database server without packet loss Which action must the engineer take to resolve the issue?
- A. Leak the 172, 17.10/24 route in the IS-IS databases on routers A and C.
- B. Advertise the application server subnet in the router D IS-IS database
- C. Leak the customer A and customer C subnets in the router A IS-IS database.
- D. Advertise a static default route to the router B IS-IS database.
Answer: B
NEW QUESTION # 92
Refer to the exhibit.
Traffic flow from router R1 to router R6 is delay-sensitive It must consider potential link-failure and node-failure conditions Which configuration must an engineer apply to router R1 to route traffic to router R6 if router R2 fails?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
NEW QUESTION # 93
Refer to the exhibit.
There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: B
NEW QUESTION # 94
Refer to the exhibit.
CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/47868-ospfdb9.html
NEW QUESTION # 95
Refer to the exhibit.
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 uses router 1 as the next hop for 192.168.0.0/24
- B. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- C. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
- D. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
Answer: D
NEW QUESTION # 96
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 97
Refer to the exhibit.
The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?
- A. 192.168.3.2
- B. 192.168.1.6
- C. 192.168.3.6
- D. 192. 168.1.2
Answer: D
NEW QUESTION # 98
Refer to the exhibit.
Why is neighbor 10.1.5.5 stuck in "2WAY" state?
- A. Router ID 10.1.5.5 is not reachable from R2
- B. OSPF authentication has failed between R2 and 10.1.5.5
- C. It is an expected behavior when OSPF network type is broadcast
- D. OSPF parameters (Area ID or hello interval) are mismatched between R2 and 10.1.5.5
Answer: C
NEW QUESTION # 99
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. R4 prefer to reach R5 using R1 as the next hop
- B. R5 prefers to use R4 as the next hop for all routes
- C. All links have equal cost if the default metric is used
- D. R1 prefer to use R5 as the next hop to reach R4
Answer: C
NEW QUESTION # 100
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
- B. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- C. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- D. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
Answer: D
NEW QUESTION # 101
Refer to the exhibit.
Router 1 and Routed have shared routes in the OSPF database but the routes are missing from their routing tables. Checking me prefix-list configuration on both routers, the engineer confirmed all networks are allowed What action should the engineer take to fa the problem?
- A. Configure interface Senal1/0 on Router1 as a point-to-point interface
- B. Configure the two routers with different hello and dead timer values
- C. Configure the two routers with different process IDs
- D. Switch the DR and BDR roles between the two routers
Answer: A
NEW QUESTION # 102
Which feature is used in multicast routing to prevent loops?
- A. RPF
- B. inverse ARP
- C. STP
- D. split horizon
Answer: A
NEW QUESTION # 103
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- B. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- C. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- D. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
Answer: A
NEW QUESTION # 104
Refer to the exhibit.
Refer to the exhibit While troubleshooting a networking issue an engineer identified a suboptimal communication issue on route reflector RR2 In the current environment Router A is a non-route-reflector client for RR1 and RR2 Routers D and E are directly connected iBGP peers.
Router F is not an iBGP peer of routers D and E
Which action resolves the issue?
- A. Remove the route-reflector configuration on router RR2.
- B. Enable next-hop-self for BGP peering on router D.
- C. Enable next-hop-self for BGP peering on router C.
- D. Disable BGP Client-to-Client reflection on router RR2.
Answer: C
NEW QUESTION # 105
Refer to the exhibit. R3 is:
* failing to accept multicast RP information from Domain-A
* advertising MSDP SA messages to R1 and R4
* receiving SA messages only from R4
Which command must the engineer implement to resolve the issue?
- A. R3# ip msdp sa-filter in 192.168.3.1
- B. R3# no ip msdp peer 192.168.1.1
- C. R3# ip msdp sa-filter out 192.168.1.1
- D. R3# no ip msap sa-filter in 192.168.1.1
Answer: A
Explanation:
https://allthingsnetworking.wordpress.com/2014/06/27/pim-msdp-sa-filter/
NEW QUESTION # 106
Refer to the exhibit.
Answer:
Explanation:
Solution :-
R1
Router bgp 100
Neigh 10.3.3.3 remote-as 100
Neigh 10.3.3.3 update-source loopback0
Address-family ipv4
Neigh 10.3.3.3 next-hop-self
Aggregate-address 172.16.100.0 255.255.252.0 summary-only
Copy run start
R3
Router bgp 100
Neigh 10.1.1.1 remote-as 100
Neigh 10.1.1.1 update-source loopback 0
Copy run start
Verification:-
NEW QUESTION # 107
Refer to the exhibit.
Routers RA and RB are IS-IS peers configured for NSF but router RC is an IS-IS peer without NSF capability If RA undergoes processor switchover what is the effect on the network environment?
- A. All peer relationships remain up and the link-state database is unchanged
- B. If RC is operating without the Cisco configuration option only 2 routers tear down their peering relationships and re-establish peering
- C. If RC is operating without the Cisco configuration option all three routers tear down their peering relationships and re-establish peering
- D. All peer relationships remain up, but the link-state database is rebuilt on each device
Answer: D
NEW QUESTION # 108
......
The Cisco 300-510 certification exam is an important step for network engineers who want to advance their careers in the field of service provider routing. This certification demonstrates the candidate's proficiency in advanced routing technologies and solutions, making them a valuable asset to any organization that relies on service provider networks. With this certification, candidates can expect to qualify for higher-level positions in service provider network design, implementation, and operations, as well as earn higher salaries and greater recognition within the industry.
Cisco 300-510: Selling CCNP Service Provider Products and Solutions: https://torrentvce.exam4free.com/300-510-valid-dumps.html
